2.8 Inch DC DC Buck Converter CC CV Power Module 60V 5A 300W Adjustable Regulated 5V 12V 24V power supply RS485 Modbus
Rated 3.5/5 based on 11 customer reviews

2.8 Inch DC DC Buck Converter CC CV Power Module 60V 5A 300W Adjustable Regulated 5V 12V 24V power supply RS485 Modbus

Voir tous les produits de : MultiShop.lu
Available: In Stock
€60,63 €67,91
type

WDPS6005

Phase: DC

Current Type: DC

is_customized: Yes

RM1307731649002455

Version description: This CNC power supply is divided into two versions, the version with MODBUS function and the version without MODBUS function. The difference is that the power supply of the MODBUS version has an RS485 communication interface. You can use the host computer software to set or collect data. Communicate with computers, PLCs, DCS, smart meters and other devices! Other than that, the other functions are the same!

Product parameters:

Input voltage: 6V-70V

 

Output voltage: 0-60V continuously adjustable (can only be used as a buck module, the input must be greater than the output 1V)

 

Output current: 0-5A continuously adjustable

 

Output power: maximum 300W

 

Working temperature: -10~+75 degrees Celsius

 

Resolution: voltage 0.01V, current 0.001A

 

Accuracy: voltage 0.3%±3 words, current 0.5%±5 words

 

Conversion efficiency: up to 95%

 

Short circuit protection: Yes, the constant current value currently set by constant current

  

Input anti-reverse connection: yes

 

Output backflow: Yes

 

Wiring method: terminal VI+ is positive input, VO+ is positive output, B+ is dedicated charging interface

 

Module size: length 120mm width 64mm height 72mm

 

Hole size: length 117mm width 60mm

 

Weight: 223g

 

 

Setting instructions:

Switch output setting: On the main interface, short press "Code Switch" directly to turn on or off the output voltage. When turned off, the voltage, current and power all show 0.

Key lock setting: In the main interface, directly press the "SET" key to turn on or off the key lock function. When locked, all other keys are invalid.

 

Charging mode switching: the output mode must be turned off (short press the coding switch to switch the output), press the "MODE" key to enter the charging mode, the output positive electrode should be connected to the "B+" terminal, with anti-backflow function, full automatic shutdown output, protection The battery is overcharged. Press "MODE" again to switch back.

 

Output voltage setting: short press "CV" key, the lower U-SET font is displayed in red, rotate the coding switch to adjust the current output voltage value, short press the coding switch to switch between coarse and fine adjustment, and then long press "CV" key after adjustment , Save and exit. (You can also enter the SET menu to set the current voltage)

 

Output current setting: short press the "CC" key, the lower I-SET font is displayed in red, rotate the code switch to adjust the current output current value, short press the code switch to switch between coarse and fine adjustments, and then long press the "CC" key after adjustment , Save and exit. (You can also enter the SET menu to set the current) (Note that the CC status indicator will be converted to white text on a red background at constant current! Only when the actual load output current is greater than the set current will it be in constant current mode, otherwise it will work in constant voltage state. Either the current is adjusted to 2A, or any device becomes 2A, I hope to know.)

 

Quick data set setting: the output state must be turned off (short press the coding switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate the "P-ARRAY" item , Rotate the coding switch to adjust the current value. (10 different data groups can be set, each group can set different values, you can directly press the "P1" or "P2" key to quickly call the P1, P2 CNC group, other groups need to be called in the setting menu)

Power-on output switch setting: the output must be turned off (short press the coding switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate to "P-UP" Item, rotate the code switch to adjust the current value. (When set to OFF, the current data set output is off at power-on, when set to ON, the current data set output is on at power-on)

 

Over-voltage setting: the output must be turned off (short press the code switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in turn, and locate the "S-OVP" item, Rotate the coding switch to adjust the current value. Short press the coding switch to switch between coarse adjustment and fine adjustment. After adjustment, press the "SET" key to exit the last item. (When the input voltage exceeds the set value, the output will be automatically turned off)

 

Over-power setting: the output must be turned off (short press the code switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate the "S-OPP" item, Rotate the coding switch to adjust the current value. Short press the coding switch to switch between coarse adjustment and fine adjustment. After adjustment, press the "SET" key to exit the last item. (When the output power exceeds the set value, the output will be automatically turned off)

 

Buzzer setting: must be in the output off state (short press the code switch to switch the output), long press SET button to enter the setting menu interface, press "SET" button to select the setting items in turn, locate the "BEEP" item, rotate The code switch adjusts the current value. ON means to turn on the buzzer. At this time, each operation buzzer will sound a "beep"; OFF means to turn off the buzzer.

 

Communication address setting: the output must be turned off (short press the code switch to switch the output), long press the SET button to enter the setting menu interface, press the "SET" button to select the setting items in turn, locate the "SLAVE ID" item, rotate The coding switch adjusts the current value and can be set in the range of 001-254. This setting requires Modbus version to be effective.

 

Baud rate setting: the output must be turned off (short press the code switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate the "SLAVE ID" item, Rotate the coding switch to adjust the current value, and the range of 4800-115200 can be set. This setting needs Modbus version to be effective

 

Notice : If you want the With Modbus Version , you need have the USB to RS485 Module ,it's not include in this package 

 

WDPS6005

Phase: DC

Current Type: DC

is_customized: Yes

RM1307731649002455

Version description: This CNC power supply is divided into two versions, the version with MODBUS function and the version without MODBUS function. The difference is that the power supply of the MODBUS version has an RS485 communication interface. You can use the host computer software to set or collect data. Communicate with computers, PLCs, DCS, smart meters and other devices! Other than that, the other functions are the same!

Product parameters:

Input voltage: 6V-70V

 

Output voltage: 0-60V continuously adjustable (can only be used as a buck module, the input must be greater than the output 1V)

 

Output current: 0-5A continuously adjustable

 

Output power: maximum 300W

 

Working temperature: -10~+75 degrees Celsius

 

Resolution: voltage 0.01V, current 0.001A

 

Accuracy: voltage 0.3%±3 words, current 0.5%±5 words

 

Conversion efficiency: up to 95%

 

Short circuit protection: Yes, the constant current value currently set by constant current

  

Input anti-reverse connection: yes

 

Output backflow: Yes

 

Wiring method: terminal VI+ is positive input, VO+ is positive output, B+ is dedicated charging interface

 

Module size: length 120mm width 64mm height 72mm

 

Hole size: length 117mm width 60mm

 

Weight: 223g

 

 

Setting instructions:

Switch output setting: On the main interface, short press "Code Switch" directly to turn on or off the output voltage. When turned off, the voltage, current and power all show 0.

Key lock setting: In the main interface, directly press the "SET" key to turn on or off the key lock function. When locked, all other keys are invalid.

 

Charging mode switching: the output mode must be turned off (short press the coding switch to switch the output), press the "MODE" key to enter the charging mode, the output positive electrode should be connected to the "B+" terminal, with anti-backflow function, full automatic shutdown output, protection The battery is overcharged. Press "MODE" again to switch back.

 

Output voltage setting: short press "CV" key, the lower U-SET font is displayed in red, rotate the coding switch to adjust the current output voltage value, short press the coding switch to switch between coarse and fine adjustment, and then long press "CV" key after adjustment , Save and exit. (You can also enter the SET menu to set the current voltage)

 

Output current setting: short press the "CC" key, the lower I-SET font is displayed in red, rotate the code switch to adjust the current output current value, short press the code switch to switch between coarse and fine adjustments, and then long press the "CC" key after adjustment , Save and exit. (You can also enter the SET menu to set the current) (Note that the CC status indicator will be converted to white text on a red background at constant current! Only when the actual load output current is greater than the set current will it be in constant current mode, otherwise it will work in constant voltage state. Either the current is adjusted to 2A, or any device becomes 2A, I hope to know.)

 

Quick data set setting: the output state must be turned off (short press the coding switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate the "P-ARRAY" item , Rotate the coding switch to adjust the current value. (10 different data groups can be set, each group can set different values, you can directly press the "P1" or "P2" key to quickly call the P1, P2 CNC group, other groups need to be called in the setting menu)

Power-on output switch setting: the output must be turned off (short press the coding switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate to "P-UP" Item, rotate the code switch to adjust the current value. (When set to OFF, the current data set output is off at power-on, when set to ON, the current data set output is on at power-on)

 

Over-voltage setting: the output must be turned off (short press the code switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in turn, and locate the "S-OVP" item, Rotate the coding switch to adjust the current value. Short press the coding switch to switch between coarse adjustment and fine adjustment. After adjustment, press the "SET" key to exit the last item. (When the input voltage exceeds the set value, the output will be automatically turned off)

 

Over-power setting: the output must be turned off (short press the code switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate the "S-OPP" item, Rotate the coding switch to adjust the current value. Short press the coding switch to switch between coarse adjustment and fine adjustment. After adjustment, press the "SET" key to exit the last item. (When the output power exceeds the set value, the output will be automatically turned off)

 

Buzzer setting: must be in the output off state (short press the code switch to switch the output), long press SET button to enter the setting menu interface, press "SET" button to select the setting items in turn, locate the "BEEP" item, rotate The code switch adjusts the current value. ON means to turn on the buzzer. At this time, each operation buzzer will sound a "beep"; OFF means to turn off the buzzer.

 

Communication address setting: the output must be turned off (short press the code switch to switch the output), long press the SET button to enter the setting menu interface, press the "SET" button to select the setting items in turn, locate the "SLAVE ID" item, rotate The coding switch adjusts the current value and can be set in the range of 001-254. This setting requires Modbus version to be effective.

 

Baud rate setting: the output must be turned off (short press the code switch to switch the output), long press the SET key to enter the setting menu interface, press the "SET" key to select the setting items in sequence, and locate the "SLAVE ID" item, Rotate the coding switch to adjust the current value, and the range of 4800-115200 can be set. This setting needs Modbus version to be effective

 

Notice : If you want the With Modbus Version , you need have the USB to RS485 Module ,it's not include in this package